Iron Water Filters

WaterBoss Model 900
Model 900

WATERBOSS® MODELS 700 AND 900

Many well water sources require an iron water filter. WaterBoss Models 700 and 900 have a built-in iron water filter capability. By using a packed bed of fine mesh resin, WaterBoss can handle up to10 ppm of iron, twice as much as a conventional DIY water softener.

Iron filtration illustration

WATERBOSS MODEL 900IF

In more severe iron water conditions, using the WaterBoss Model 900IF iron water filter may be necessary. The Model 900 IF* is a dedicated iron water filter with a maximum ferrous iron reduction of 15 ppm. The Model 900IF uses a greensand media. Greensand is one of the oldest and most effective oxidation technologies. Potassium permanganate is used to regenerate the greensand. In this application, potassium permanganate produces manganese dioxide on the surface of the mineral and when the water comes in contact with it any iron is immediately oxidized.

The iron is then filtered and cleaned away in the backwash cycle. The WaterBoss model 900 IF iron water filter can be used in tandem with WaterBoss Models 700, 900 or any conventional softener.

*Special order in store only

WaterBoss 900if cutaway
MODEL 900IF